Document migrated. An updated Configure Serial Console Guide can be found in the http://wanos.co/docs Wanos Documentation site]

Configure Serial Console

Wanos supports Serial Console. By default, it uses ttyS0 and ttyS1 with baud rate 9600. You can change the settings by updating the inittab file.

Open the inittab file by typing:

vi /etc/inittab

Enter edit mode by pressing A or I and enter the values that match your hardware configuration.

To save your changes, press the ESC key and type !wq.

Reboot your machine by issuing this command:

sudo reboot

Check your hardware documentation to determine the serial port number and baud rate used.