From Wanos Wiki
Jump to: navigation, search
(Created page with "How to change the wan0 and lan0 to bind on a different interface for NIC Bypass: If the Bypass pair is on ''eth2'' and ''eth3'' interfaces: <li>Edit the mactab file by: <pre...")
 
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
−
How to change the wan0 and lan0 to bind on a different interface for NIC Bypass:
+
<font size=5> Document migrated. An updated [http://wanos.co/docs/docs/wanos-admin-guide/optional-configuration/interface-settings/ Interface Settings] can be found in the [http://wanos.co/docs Wanos Documentation site] </font>
 +
<font color=#dddddd>
 +
 
 +
==How to change the '''wan0''' and '''lan0''' to bind on a different interface for NIC Bypass==
  
 
If the Bypass pair is on ''eth2'' and ''eth3'' interfaces:
 
If the Bypass pair is on ''eth2'' and ''eth3'' interfaces:
Line 18: Line 21:
 
sudo reboot
 
sudo reboot
 
</pre>
 
</pre>
 +
 +
</font>

Latest revision as of 11:49, 9 February 2017

Document migrated. An updated Interface Settings can be found in the Wanos Documentation site

How to change the wan0 and lan0 to bind on a different interface for NIC Bypass

If the Bypass pair is on eth2 and eth3 interfaces:

  • Edit the mactab file by: 
    vi /tce/etc/mactab
  • Press A or I to go into edit mode.
  • Assign the MAC address of eth2 to wan0 and the MAC address of eth3 to lan0.
  • Press ESC key to exit edit mode and type: 
    !wq

    to save your changes.

  • Reboot your Appliance by typing this command. 
    sudo reboot

    • Retrieved from "http://wanos.co/wiki/index.php?title=Change_wan0_and_lan0_pair_for_NIC_Bypass&oldid=722"