From Wanos Wiki
Line 1: | Line 1: | ||
*'''Deployment Mode''' | *'''Deployment Mode''' | ||
− | Bridge Mode is a transparent, inline, bump in the wire deployment using two interfaces. Requires little to no configuration. This is the default option. <br /> | + | #Bridge Mode is a transparent, inline, bump in the wire deployment using two interfaces. Requires little to no configuration. This is the default option. <br /> |
− | Router mode uses only the wan0 interface, but uses two IP address for inside and outside routing. Requires routing configuration on WAN and LAN. <br /> | + | #Router mode uses only the wan0 interface, but uses two IP address for inside and outside routing. Requires routing configuration on WAN and LAN. <br /> |
− | Tunnel mode encapsulates optimized traffic in an UDP header and tunnels the traffic to the remote end. MultiSite Peer IP configuration is required in order for Tunnel Mode to work. | + | #Tunnel mode encapsulates optimized traffic in an UDP header and tunnels the traffic to the remote end. MultiSite Peer IP configuration is required in order for Tunnel Mode to work. |
*'''Secondary Address / Mask''' | *'''Secondary Address / Mask''' |
Revision as of 14:27, 14 October 2015
- Deployment Mode
- Bridge Mode is a transparent, inline, bump in the wire deployment using two interfaces. Requires little to no configuration. This is the default option.
- Router mode uses only the wan0 interface, but uses two IP address for inside and outside routing. Requires routing configuration on WAN and LAN.
- Tunnel mode encapsulates optimized traffic in an UDP header and tunnels the traffic to the remote end. MultiSite Peer IP configuration is required in order for Tunnel Mode to work.
- Secondary Address / Mask
This option is only available in Router mode. It requires a secondary IP address (inside). Format IP/Mask x.x.x.x/x When enabled, internal traffic to be optimized should be routed to this gateway address.
- WAN Gateway
Gateway on wan0 device. Default value is 192.168.1.1
- WAN IP Address / Mask
wan0 IP Address. Format IP/Mask x.x.x.x/x Default value is 192.168.1.201/24