Change DataStore Location

Wanos offers the option to modify your DataStore location by switching partitions, physical disks or USB drives/sticks.

How to change DataStore Location

1. Determine your new partition or drive by running:

fdisk -l

In this example, a new disk called sdb has been added.

2. Run the following commands in the exact order:

/tce/etc/wanos/wanos-fdisk sdX

Replace "X" in sdX with the correct letter of the target drive. In this example, b was used = sdb.

reboot

mkfs.ext3 /dev/sdX1

Replace "X" is sdX1 with the corect letter of the target drive. In this example, b was used = sdb1.

reboot

3. Set the DataStore in Wanos web UI. Configure > System Settings In this example, b was used = sdb1.
Scroll to the bottom part of the page, click the Submit button, click OK on the dialog box and Wanos will reboot.