Author Topic: By-pass rules required on which end?  (Read 4200 times)

ahenning

  • Team Wanos
  • Administrator
  • Full Member
  • *****
  • Posts: 629
    • View Profile
By-pass rules required on which end?
« on: April 04, 2014, 10:11:35 AM »
Traffic policy rules apply to traffic going out on wan0.

To bypass traffic from a Server going towards a remote site, the rule would normally be applied on the server side device.
To bypass upstream traffic from the remote site going towards the server, the rule would be applied on the user side device.
« Last Edit: September 25, 2014, 09:57:51 PM by ahenning »
CCIE RS, CCIE SP, Mnet&sys

Note: Forum posts may be outdated. Please see the latest documentation at wanos.co/docs

peter

  • Contributor
  • Full Member
  • *****
  • Posts: 51
    • View Profile
Re: By-pass rules required on Edge and Core?
« Reply #1 on: July 08, 2014, 09:10:29 AM »
by-pass rules seem not work or I could be wrong, pls help

test version 1.2.1 with ftp

network setup

client --- wanos(edge) --- router --- wanos(core) --- server

 192.168.3.0/24(client)            192.168.4.0/24(server)

tc network simulation running on router

step 1
no wanos devices for acceleration
client --- router --- server

ftp output bandwidth is around 280k

step 2

with wanos devices for acceleration

client --- wanos(edge) --- router --- wanos(core) --- server
ftp output bandwidth improves to 680k which is great


step 3

with step 2 setup, by adding  by-pass rule for network 192.168.3.0/24
pls see separate attachments enabled on both core and edge

ftp output bandwidth still improves to 1300, guessing because of 2nd transferring.  But, it is suppose to get step 1 output bandwidth.
Please help and thanks.
(attachment follows)


peter

  • Contributor
  • Full Member
  • *****
  • Posts: 51
    • View Profile
Re: By-pass rules required on Edge and Core?
« Reply #2 on: July 08, 2014, 09:15:20 AM »
edge device 192.168.3.0/24

peter

  • Contributor
  • Full Member
  • *****
  • Posts: 51
    • View Profile
Re: By-pass rules required on Edge and Core?
« Reply #3 on: July 08, 2014, 09:16:26 AM »
core device 192.168.4.0/24

ahenning

  • Team Wanos
  • Administrator
  • Full Member
  • *****
  • Posts: 629
    • View Profile
Re: By-pass rules required on Edge and Core?
« Reply #4 on: July 08, 2014, 09:53:56 AM »
Hi Peter, bypass rules looks ok. Just to be sure the policy is applied restart the service: configure > reset. I'll test the same configuration in the mean time.
CCIE RS, CCIE SP, Mnet&sys

Note: Forum posts may be outdated. Please see the latest documentation at wanos.co/docs