Author Topic: redirection - external traffic going through wanos  (Read 4209 times)

smadon

  • Member
  • ***
  • Posts: 12
    • View Profile
redirection - external traffic going through wanos
« on: August 11, 2017, 03:26:00 PM »
Hi,

Is it possible to force a branch office to go to the HQ (through a VPN) for a specific external traffic range.
For exemple if I want the range : 123.345.567.0/24 going through the VPN to the wanos in the HQ.

How can I do that ?
Can I use the Tunnel Option ?

For exemple:
Setup :  BranchNetwork -- BranchWanos -- BranchRouter -- Internet -- HQRouter - HQWanos -- HQNetwork
Wanos Branch : 192.168.1.20 (router : 192.168.1.1 - network : 192.168.1.0/24)
Wanos HQ : 10.0.0.20 (router: 10.0.0.1 - network : 10.0.0.0/24)
Tunnel option on the WANOS Branch :
Tunnel Destination Subnets :123.345.567.0/24
Tunnel Peer IP  : 10.0.0.20

What should be the correct  setup ? should I do it on the router ?

Thanks for your help
Smadon

ahenning

  • Team Wanos
  • Administrator
  • Full Member
  • *****
  • Posts: 629
    • View Profile
Re: redirection - external traffic going through wanos
« Reply #1 on: August 11, 2017, 03:37:26 PM »
Hi Smadon,

Yes, that would one possible way.
Also you would need the BranchNetwork to either use BranchWanos as gateway or add a route on the BranchNetwork workstations:
route add net 123.xx.xx.xx/yy 192.168.1.20
CCIE RS, CCIE SP, Mnet&sys

Note: Forum posts may be outdated. Please see the latest documentation at wanos.co/docs