Author Topic: Please e1000bp.ko new version  (Read 3505 times)

makun

  • Member
  • ***
  • Posts: 3
    • View Profile
Please e1000bp.ko new version
« on: August 02, 2015, 05:13:41 PM »
Hello
I have Steelhead 550(No licenses).
This hardware cannot boot from Sata hdd.
I use Bootable USB of the Wanos.
(to 16GB Flashmemory)
but bypass NIC does not working.
Please e1000bp.ko for 3.8.13-Tiny.
Thanks.

ahenning

  • Team Wanos
  • Administrator
  • Full Member
  • *****
  • Posts: 629
    • View Profile
e1000bp.ko driver for SteelHead 550
« Reply #1 on: August 02, 2015, 05:57:09 PM »
Hi, is the e1000bp bypass driver from the wanos-2.0.5-silicom.zip image detecting the interfaces in the Riverbed Steelhead 550?

Original e1000bp thread: http://wanos.co/forum/index.php?topic=186.15
CCIE RS, CCIE SP, Mnet&sys

Note: Forum posts may be outdated. Please see the latest documentation at wanos.co/docs

makun

  • Member
  • ***
  • Posts: 3
    • View Profile
Re: e1000bp.ko driver for SteelHead 550
« Reply #2 on: August 03, 2015, 02:03:40 PM »
Hi Ahenning
I checked Original e1000bp thread.
but, I cannot try the wanos-2.0.5-silicom image,
because, Riverbed Steelhead 550 cannot boot from SATA HDD or SSD.(SATA HDD/SSD was detected)
I use Bootable USB image of the wanos write to USB flash 16GB.
and copy e1000bp.ko(direct link) , edit bootsync.sh.
but  "bypass nic" not working,

Quote
tc@wanos:/$ sudo insmod /mnt/sda1/tce/packages/click/e1000bp.ko
insmod: can't insert '/mnt/sda1/tce/packages/click/e1000bp.ko': invalid module format

tc@wanos:/$ modinfo /mnt/sda1/tce/packages/click/e1000bp.ko
filename:       /mnt/sda1/tce/packages/click/e1000bp.ko
license:        GPL
author:         Silicom, Ltd
description:    Silicom PXBPI/PXTBI/PEBPI Network Driver
version:        8.0.35.silc.5.56.4-NAPI
...


Please assist, Thanks
« Last Edit: August 03, 2015, 03:23:57 PM by ahenning »

ahenning

  • Team Wanos
  • Administrator
  • Full Member
  • *****
  • Posts: 629
    • View Profile
Re: e1000bp.ko driver for SteelHead 550
« Reply #3 on: August 03, 2015, 03:17:43 PM »
Yes, as noted that driver is for the older kernel. The driver source is not compatible with the newer kernels.

I would recommend using a larger usb or external drive for now.
« Last Edit: August 03, 2015, 03:23:48 PM by ahenning »
CCIE RS, CCIE SP, Mnet&sys

Note: Forum posts may be outdated. Please see the latest documentation at wanos.co/docs

makun

  • Member
  • ***
  • Posts: 3
    • View Profile
Re: Please e1000bp.ko new version
« Reply #4 on: August 03, 2015, 10:31:06 PM »
Oh...... Ok.......
I understood.
I will buy large USB flash, and try it.

ahenning

  • Team Wanos
  • Administrator
  • Full Member
  • *****
  • Posts: 629
    • View Profile
Re: Please e1000bp.ko new version
« Reply #5 on: August 03, 2015, 10:49:37 PM »
Ok then, once the system boots it is possible to mount the datastore on the internal drives.
CCIE RS, CCIE SP, Mnet&sys

Note: Forum posts may be outdated. Please see the latest documentation at wanos.co/docs