Firmware Warn : GHES: Failed to read status block address

[dwiggill]

Hi Guys

Trying to get WANOS installed on a SuperMicro server. Im booting from USB flash drive. During the boot process I get the message Firmware Warn : GHES: Failed to read status block address for hardware error source: 1

I take it that this message is being displayed due to incompatibility with the hardware.

The message keeps on displaying and the boot process does not move beyond this point. I found  another post where it was suggested that the core files be updated. Can anyone provide some details on how this will be accomplished.

I have also removed the RAID option in the bios and set the bios to AHCI.

Any feedback would be appreciated.

Cheers

[ahenning]

Hi Dwiggill,

Please use Wanos version 2.0.0. This error was solved on other servers with this update.