Author Topic: Interfaces LAN1 et LAN2 bypassed after boot on Wanos 450  (Read 10142 times)

antunafr

  • VIP
  • Member
  • ***
  • Posts: 6
    • View Profile
Interfaces LAN1 et LAN2 bypassed after boot on Wanos 450
« on: May 06, 2017, 04:10:12 PM »
Hi everybody,

I'm setting up now a Wanos 450 appliance and I've noticed the following behaviour:

After boot, interfaces LAN1 and LAN2 are bypassed (so shutted) and to bring them up, I have to use the appliance's buttons to disable bypass.

Is it the normal behaviour of Wanos 450 ? That is not the case for Wanos 300.

Thank you very much.

Regards.

antunafr

  • VIP
  • Member
  • ***
  • Posts: 6
    • View Profile
Re: Interfaces LAN1 et LAN2 bypassed after boot on Wanos 450
« Reply #1 on: May 12, 2017, 06:08:21 PM »
Hi again,

The problem was solved last monday with ahenning's help (thank you again:)).

For info, it was a driver problem. I replaced my driver with another one that I got from ahenning and then, the appliance started working as expected.

Regards.




Vincent

  • VIP
  • New
  • *
  • Posts: 1
    • View Profile
Re: Interfaces LAN1 et LAN2 bypassed after boot on Wanos 450
« Reply #2 on: June 01, 2017, 01:10:42 PM »
Hello
i have the same problem.
After shutdown the appliance the bypass is disabled.

Regards