Messages

16

Troubleshooting / Re: Regarding wrong policy applied during testing, which caused network to go off..

« on: October 14, 2014, 04:21:54 PM »

Before those two rules, I had wanos default rules and one more
 A
10.9.64.0/24 192.168.178.0/24 without bypass

B
192.168.178.0/24 10.9.64.0/24 without bypass

I sit on A end and do changes for B end over portal, in my scenario I applied those 2rules on B end and reset B, parallel I did changes for A end and did reset..after this both ends wanos not reachable from its actual location itself.

Tomorrow will do similar things and see if I get similar issues.

17

Troubleshooting / Regarding wrong policy applied during testing, which caused network to go off..

« on: October 14, 2014, 01:51:50 PM »

Hi,

I was doing some policy settings, one policy was with bypass & same one without bypass, after reset on both ends, machine was not reachable. Even locally over network it was not available, but machine was alive physically at both ends. Strange thing observed after reset.

same rule with bypass & without bypass.
On A:
10.9.64.0/24 10.9.17.0/24 without bypass
10.9.64.0/24 10.9.17.0/24 with bypass

On B:
10.9.17.0/24 10.9.64.0/24 without bypass
10.9.17.0/24 10.9.64.0/24 with bypass

When I logged into machine physically, I was not able to see the ip address on the machine, even Tun0 was not visible,  I restarted the machine, but still network was not available, then I had to /etc/wanos/clean.sh then reassign the ip address again. Same was done on other end to bring back network alive.

18

Features / Policies rules modifcation

« on: October 14, 2014, 10:26:13 AM »

Hi,

Provide option to uncheck & check the Policies rules modification without deleting the rules & re-adding it..
even policy refresh should happen without resetting .

19

Troubleshooting / How to bypass the policies which is already added

« on: October 13, 2014, 06:29:55 AM »

Hi,

I see check box not working after adding policies without bypass, later if I want to select the rule to bypass, its not possible to "tick it". I have to delete the rule & re-add again to bypass & vice versa.

20

Installation / Re: Update Process

« on: October 08, 2014, 09:58:56 AM »

Browser Cache problem, I cleared & now got correct files..no issues now updated to 1.4

21

Installation / Re: Re: Update 1.4.0

« on: October 08, 2014, 09:14:28 AM »

Pls find the attached image. I'm trying intra net method & in past i was successful with old updates.

I have files downloaded "update & 1.4.tar" file & kept in the folder /tce/update
upon executing its trying to download from internet, in the same folder if I copy 1.3.tar file, update happens but not with 1.4

22

Troubleshooting / Re: Lan0 & wan0 speed

« on: October 07, 2014, 12:46:27 PM »

Hi,

After updates, I don't see network hung...Transferred around 10GB of files of different size & format, everything going smooth.
Will mail you on the results & doubts which I have on report section.

23

Troubleshooting / Re: Lan0 & wan0 speed

« on: July 24, 2014, 10:12:54 AM »

On B End I see, is this normal.

IPFragmenter(1500) DF

Thu Jul 24 11:22:28 UTC 2014  : Info : Reboot Requested
Thu Jul 24 11:22:49 UTC 2014  : Routine : Initializing Startup Scripts
Thu Jul 24 11:22:49 UTC 2014  : Routine : Set Interface Roles
Thu Jul 24 11:22:50 UTC 2014  : Routine : Setting Optional Interface driver flags if supported
Thu Jul 24 11:22:50 UTC 2014  : Routine : Check Configs
Thu Jul 24 11:22:50 UTC 2014  : Routine : Updating Configuration
Thu Jul 24 11:22:50 UTC 2014  : Routine : Initializing Wanos Click
wanos.click:9: While initializing 'lan0 :: FromDevice':
  warning: lan0: no IPv4 address assigned
wanos.click:8: While initializing 'wan0 :: FromDevice':
  warning: wan0: no IPv4 address assigned
IPFragmenter(1500) DF 192.168.39.152 10.9.64.111 len=1512
IPFragmenter(1500) DF 192.168.39.152 10.9.64.111 len=1513
IPFragmenter(1500) DF 192.168.39.152 10.9.64.111 len=1513
IPFragmenter(1500) DF 192.168.39.152 10.9.64.111 len=1513
IPFragmenter(1500) DF 192.168.39.152 10.9.64.111 len=1513
IPFragmenter(1500) DF 192.168.39.152 10.9.64.111 len=1513
Thu Jul 24 15:42:05 UTC 2014  : Routine : Initializing Startup Scripts
Thu Jul 24 15:42:05 UTC 2014  : Routine : Check Configs
Thu Jul 24 15:42:05 UTC 2014  : Routine : Updating Configuration
Thu Jul 24 15:42:05 UTC 2014  : Routine : Initializing Wanos Click
wanos.click:9: While initializing 'lan0 :: FromDevice':
  warning: lan0: no IPv4 address assigned
wanos.click:8: While initializing 'wan0 :: FromDevice':
  warning: wan0: no IPv4 address assigned

24

Troubleshooting / Re: Lan0 & wan0 speed

« on: July 24, 2014, 04:36:11 AM »

One more thing observed..if I try to copy multiple files at a time, then network stops. same compressed file of 2GB works fine without issue.
I'm not sure if wanos is able to handle multiple random files at same time.

on A end I see
ToDevice(wan0): Message too long

25

Troubleshooting / Re: Lan0 & wan0 speed

« on: July 23, 2014, 11:44:39 AM »

hi,

Core--Core
Today we loaded 1Gig card on B end, now I see A end giving issue, if I try to upload the data to B...network stops & I have to restart A end services.

B to A download is not giving any issue at the moment

A end:

Wed Jul 23 17:00:02 UTC 2014  : Routine : Initializing Startup Scripts
Wed Jul 23 17:00:02 UTC 2014  : Routine : Check Configs
Wed Jul 23 17:00:02 UTC 2014  : Routine : Updating Configuration
Wed Jul 23 17:00:02 UTC 2014  : Routine : Initializing Wanos Click
wanos.click:9: While initializing 'lan0 :: FromDevice':
  warning: lan0: no IPv4 address assigned
wanos.click:8: While initializing 'wan0 :: FromDevice':
  warning: wan0: no IPv4 address assigned
Wed Jul 23 17:11:40 UTC 2014  : Info : Reboot Requested
Wed Jul 23 17:12:05 UTC 2014  : Routine : Initializing Startup Scripts
Wed Jul 23 17:12:05 UTC 2014  : Routine : Set Interface Roles
Wed Jul 23 17:12:05 UTC 2014  : Routine : Setting Optional Interface driver flags if supported
Wed Jul 23 17:12:06 UTC 2014  : Routine : Check Configs
Wed Jul 23 17:12:06 UTC 2014  : Routine : Updating Configuration
Wed Jul 23 17:12:06 UTC 2014  : Routine : Initializing Wanos Click
wanos.click:9: While initializing 'lan0 :: FromDevice':
  warning: lan0: no IPv4 address assigned
wanos.click:8: While initializing 'wan0 :: FromDevice':
  warning: wan0: no IPv4 address assigned

26

Troubleshooting / Re: Lan0 & wan0 speed

« on: July 22, 2014, 04:16:54 AM »

B end I see this

Mon Jul 21 19:30:01 UTC 2014  : Routine : Initializing Startup Scripts
Mon Jul 21 19:30:01 UTC 2014  : Routine : Set Interface Roles
Mon Jul 21 19:30:01 UTC 2014  : Routine : Setting Optional Interface driver flags if supported
Cannot set device rx csum settings: Operation not supported
Cannot set device tx csum settings: Operation not supported
Cannot set device scatter-gather settings: Operation not supported
Cannot set device tcp segmentation offload settings: Operation not supported
Mon Jul 21 19:30:01 UTC 2014  : Routine : Check Configs
Mon Jul 21 19:30:01 UTC 2014  : Routine : Updating Configuration
Mon Jul 21 19:30:02 UTC 2014  : Routine : Initializing Wanos Click
wanos.click:9: While initializing 'lan0 :: FromDevice':

27

Troubleshooting / Re: Lan0 & wan0 speed

« on: July 21, 2014, 04:37:37 PM »

Is ssh access fine ?, if not I will share webex event id details for view.

Do you think should I check with 1.2.1 ?

28

Troubleshooting / Re: Lan0 & wan0 speed

« on: July 21, 2014, 03:50:38 PM »

Open remote access to B end ? What I'm supposed to do ?

Sorry...this troubleshooting is going on for many days..thanks for your patience in trying to help me...

29

Troubleshooting / Re: Lan0 & wan0 speed

« on: July 21, 2014, 02:00:52 PM »

Hi,

DD was for my other testing, so its not related to this testing.

30

Troubleshooting / Re: Lan0 & wan0 speed

« on: July 21, 2014, 01:58:09 PM »

now again I connected without router.

Core--Core

I can download single Zip files of 300MB + ( earlier I have not tried single compressed files ), both ways multiple times. If same file  is extracted & try to download then it stops after some time.  Folder contains, exe, doc, etc.
Other B end don't respond, again we need to access via Ssh & reboot the machine

Core-Edge ( above issue )
Edge--Core ( above issue )

Edge--Edge

No issues oberved even for extracted files, I was able to download 600Mb extracted files muliple times both ways.


Do you think I should try with 1.2.1 version