1
Deployment / Re: New deployment - No Optimization - Peer down
« on: April 29, 2020, 10:26:15 PM »
Thank you all for your support.
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Deployment / Re: New deployment - No Optimization - Peer down
« on: April 27, 2020, 08:48:12 PM »
Thanks guys for your support and fast reply.
I apologise I haven't replied any sooner, I had an online examination today, so I haven't checked the forum since I first post the question.
I have one more problem now. Before you sent me the second licence, I was trying to add a WAN emulator (WANem) between both devices to add some noise in the channel. So, I was trying to route the traffic via the WANem but the static routes that I set on the WanOS WUI, did not work. Then I went on the WanOS appliance command line and forced the static routes. Furthermore, when I restarted the WanOS machine, they would boot but would automatically switch it off after a few seconds.
So I deleted those machines and made a new fresh deployment. The Licence that you have sent to me cannot be applied to those new machines. I have tried even changing the MAC address of the machine and still it does not accept the licences.
Could you please help me with this licence issue?
Best regards,
Fabio
I apologise I haven't replied any sooner, I had an online examination today, so I haven't checked the forum since I first post the question.
I have one more problem now. Before you sent me the second licence, I was trying to add a WAN emulator (WANem) between both devices to add some noise in the channel. So, I was trying to route the traffic via the WANem but the static routes that I set on the WanOS WUI, did not work. Then I went on the WanOS appliance command line and forced the static routes. Furthermore, when I restarted the WanOS machine, they would boot but would automatically switch it off after a few seconds.
So I deleted those machines and made a new fresh deployment. The Licence that you have sent to me cannot be applied to those new machines. I have tried even changing the MAC address of the machine and still it does not accept the licences.
Could you please help me with this licence issue?
Best regards,
Fabio
3
Deployment / New deployment - No Optimization - Peer down
« on: April 26, 2020, 03:58:51 AM »
Hi all.
I have made my first deployment of WanOS. This is for a college assignment. I used the recommended configuration guide for VM environment (using bridge mode). It did work and from the client site, I can access the webserver on HQ site. However, I haven't seen any improvement, the graphs and metrics for optimisation doesn`t display anything. Moreover, the graphs for passthrough display the traffic flowing. Also, I noticed the peer tab does not show the devices have peered, but it can ping each other (and traffic flow between them). I just doesn't understand much, why the optimisation graphs does not show a thing. Note all the machined are in the same hypervisor, what separates them are the vlan tags only. Is anyone can help? If I am not able to prove that the traffic has been optimised I won't be able to finish my assignment.
I could not find much information on the documentation, but I was trying to add an IP address on the LAN0 interface, as I could possible try different scenarios as well.
I have made my first deployment of WanOS. This is for a college assignment. I used the recommended configuration guide for VM environment (using bridge mode). It did work and from the client site, I can access the webserver on HQ site. However, I haven't seen any improvement, the graphs and metrics for optimisation doesn`t display anything. Moreover, the graphs for passthrough display the traffic flowing. Also, I noticed the peer tab does not show the devices have peered, but it can ping each other (and traffic flow between them). I just doesn't understand much, why the optimisation graphs does not show a thing. Note all the machined are in the same hypervisor, what separates them are the vlan tags only. Is anyone can help? If I am not able to prove that the traffic has been optimised I won't be able to finish my assignment.
I could not find much information on the documentation, but I was trying to add an IP address on the LAN0 interface, as I could possible try different scenarios as well.
Pages: [1]