Wan Optimization Support
Technical => Installation => : jind April 14, 2014, 06:42:21 AM
-
i am trying to install wanos on my HP z620 workstation using the USB boot method. at the moment, the boot process is successful and i am able to enter the tinycore linux. however, the workstation is still unable to access anything on the network. i have tried to ping the gateway with no result. ifconfig only shows the loopback interface. however, if i issued the ifconfig eth0 and eth1 commands, they are shown as available yet inactive.
from the other posts in the forum, i am trying to find the /etc/wanos/clean.sh file. unfortunately, the /etc directory does not seem to contain the wanos folder. tried to serach the entire filesystem using find for anything with wanos or clean in its name, still nothing. i am using the 0.1.7 version downloaded directly from the website. is there anything i am doing wrong?
-
Hi Jind,
Please run 'fdisk -l' to see which disks are detected in your system. Is the USB disk perhaps write protected?
*Note: running /etc/wanos/clean.sh is required when replacing hardware e.g. moving the USB drive to another machine.