Wan Optimization Support

Technical => FAQ => Topic started by: ahenning on April 05, 2014, 12:42:40 PM

Title: Minimum Requirements
Post by: ahenning on April 05, 2014, 12:42:40 PM
Minimum Hardware Requirements:

Point to Point:
2 GB memory
13 GB Storage (HDD, USB or Compact Flash)
1-2 Ethernet Interfaces

Multisite:
4Gb memory
64 GB Storage (HDD, USB or Compact Flash)
1-2 Ethernet Interfaces

A minimum of 2x CPU cores is recommended, unless the link size is less than 1 Mbps.

It is recommended to use two physical interfaces in a production network. This provides the best performance and simplifies the network config and cabling. It is possible to use a single physical interface in the virtual networks. In this case two VLANs are required and promiscuous mode enabled on the portgroup level via vSphere.