Wan Optimization Support

Technical => Configuration => : q8reflex July 05, 2017, 01:20:34 PM

: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: q8reflex July 05, 2017, 01:20:34 PM

Installed Wanos on KVM with 60GB SSD disk, after doing the mkfs command and formatting, the /dev/vda3 still wont show on the System Settings panel.

Any idea why?

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: ahenning July 05, 2017, 02:04:45 PM

Yes, vdX drives enabled in v.4.1. Previously only drives starting with sd and xvd were considered automatically and vd required command line linking.

v.4.1 links coming online later.

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: q8reflex July 05, 2017, 03:39:51 PM

Thanks Antonie, So all we need to do just upgrade?

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: ahenning July 06, 2017, 01:43:13 AM

Yes, should be just update. The free space will be on vda4 / sda4

v.4.1 update links sent via email

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: q8reflex July 06, 2017, 09:41:53 AM

Thanks a lot, on it now.

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: q8reflex July 06, 2017, 11:19:17 AM

Ok, upgraded to v4.1 successfully (Minus the license issue for now) and can see /dev/vda4 created with the rest of free unallocated space but yet can't see the disk in control panel. is it because license was not applied?

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: ahenning July 06, 2017, 11:38:55 AM

Do you mean vda4 is not in the dropdown under settings -> datastore?

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: q8reflex July 06, 2017, 05:48:54 PM

Yes, actually nothing in the dropdown menu.

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: lmolina July 06, 2017, 06:09:14 PM

Greetings q8reflex,

I think you may have configured the disk to use VIRTIO drivers but I could be wrong. Can you confirm if this is the case?

Thanks!

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: q8reflex July 06, 2017, 06:12:18 PM

Yeah i remember it was Virtio driver from control panel but we can't reach the hosted instance anymore after enabling Tunnel mode as per this post here:

http://wanos.co/forum/index.php?topic=276.msg1379#msg1379

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: ahenning July 06, 2017, 10:51:41 PM

/tce/etc/wanos/wanos-fdisk list

Lists the mounted drives

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: q8reflex July 07, 2017, 12:15:53 AM

i tried both in /etc/wanos and /tce/etc/wanos and both show nothing. the DF command shows all the mounted drives and filesystems though. Attached an image showing it.

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: JohnNicholas July 07, 2017, 08:39:48 PM

Lew confirmed VIRTIO drives are listed in v.4.1.2. I think that was just for you  ;)

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: q8reflex July 07, 2017, 08:44:20 PM

I'm glad our humble struggle to get this going has advanced this project a little bit  ;D. Gonna update and see how it goes, thanks.

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: ahenning July 07, 2017, 09:28:08 PM

Thanks for beta testing  ;D

: Re: [4.0.3] Datastore on KVM /dev/vda3 not showing in panel
: q8reflex July 07, 2017, 09:44:37 PM

I'm happy to report that the /dev/vda4 is working now after updating to v4.1.2 :D