Wan Optimization Support

Technical => Troubleshooting => : srikandiduduk April 18, 2016, 03:57:41 AM

: Cannot ping Gateway
: srikandiduduk April 18, 2016, 03:57:41 AM

Hi Guys,

I cannot ping my gateway address. Can you tell me how to see I configure the gateway address properly by CLI ?
Thank you

Cheers
 

: Re: Cannot ping Gateway
: lmolina April 18, 2016, 11:17:04 AM

Hello Srikandiduduk,

By default, Wanos is configured to use 192.168.1.200. This will enable you to access the Wanos web UI.

To configure to IP, run this command on the appliance's command line interface:

:

wanos-cfg
This will prompt you to set the IP, Subnet mask and Gateway.

Let us know if you need further assistance. Thanks!