Wan Optimization Support

General Category => General Discussion => : Artecal March 10, 2015, 02:27:49 PM

: Wanos plus speed up and down
: Artecal March 10, 2015, 02:27:49 PM

Hello,

I have some questions to ask you about the product Wanos Plus.

1. What does the flow up and down correspond ? Wanos don't use a asymmetric connection for share the data between the site ?

2. How many site can we use with Wanos Plus ?

Thanks for the answer and have a nice day  :)

: Re: Wanos plus speed up and down
: ahenning March 10, 2015, 02:43:12 PM

Hi Artecal,

Welcome and thanks for asking:

Wanos Plus is limited by hardware capability.

Max number of sites depends on RAM supported: At the main site, each peer requires 1GB of Ram. E.g. 64GB Ram = 64 remote sites.
Max throughput we have tested with all features enabled per peer is 125 Mbps on high.
Max aggregated throughput depends on number of peers and CPU threads.

Flow up/down means optimization is more resource intensive than de-optimization. Throughput is Asymmetric, but traffic flow needs to be symmetric.

: Re: Wanos plus speed up and down
: Artecal March 11, 2015, 07:44:05 AM

Hi Ahenning,

Thanks for the fast answers, I just want to know if I can talk to you with a personnal e-mail.
So if you can send me your e-mail here or in private.

Thank you and best regards  :)

: Re: Wanos plus speed up and down
: ahenning March 11, 2015, 10:53:24 AM

Hi Artecal,

Sure, I sent and email to the registered address.

: Re: Wanos plus speed up and down
: ahenning March 11, 2015, 04:39:01 PM

I moved the Hyper-v Lab part to a separate thread under troubleshooting: http://wanos.co/forum/index.php?topic=170.msg

: Re: Wanos plus speed up and down
: peter May 11, 2015, 03:21:12 PM

hi,
I am really confused here speed up and down.  Since wanos needs to be paired, if one end is "up",  the other end must be "down".  For example, if  speed up and down is 6/60 and "up" side is only 6, how could "down" side reach 60 ?
Thanks
Peter

: Re: Wanos plus speed up and down
: ahenning May 11, 2015, 03:33:48 PM

Yes, point to point.

In Multisite, the head office can be 10/100 with multiple branches at 1/10.