Wan Optimization Support
Technical => Troubleshooting => : ahenning October 17, 2014, 10:38:59 AM
-
When alerts are logged and errors are displayed during multisite configuration if disk space is not sufficient.
To add an additional partition:
sudo su
/tce/etc/wanos/wanos-fdisk sda
reboot
mkfs.ext3 /dev/sda2
reboot
set the datastore to sda2 in the gui
This is based on the assumption that the only drive installed is sda and that is where the un-partitioned free space is located. If a second drive was added it would normally be sdb. Double check the output of the commands.
-
For older version like 1.4.1
We can increase the / partition using Gparted live boot disk
GParted Live on USB
Installation
Requirement:
1. Microsoft Windows 2000/XP/Vista/7, or GNU/Linux.
2. An USB flash drive with a FAT partition.
USB setup with MS Windows
• First you need to download the GParted Live Bootable Image file. Please follow the download page to download the ISO file on your MS Windows.
Download page: https://sourceforge.net/projects/gparted/files/gparted-live-stable/0.25.0-3/gparted-live-0.25.0-3-i686.iso/download?use_mirror=nchc
• Download the tuxboot file. Please follow the download page to download the exe file on your MS Windows.
Download page: http://sourceforge.net/downloads/tuxboot/
• Run the downloaded tuxboot.exe file, select an ISO file, select a target drive (USB Drive or Hard Disk).