Wan Optimization Support
News:
Latest Release v.5.1.4
Home
Help
Search
Login
Register
Wan Optimization Support
»
Technical
»
Troubleshooting
»
Packet loss recovery config
« previous
next »
Print
Pages: [
1
]
Author
Topic: Packet loss recovery config (Read 5847 times)
lexyus
Full Member
Posts: 34
Packet loss recovery config
«
on:
April 08, 2015, 01:53:49 AM »
done. it works. Thanks a lot ahenning! you're the man!
Logged
lexyus
Full Member
Posts: 34
Re: Packet loss recovery config
«
Reply #1 on:
April 08, 2015, 02:19:32 AM »
dear ahenning, my PLR status was going off after about 10 minutes online, is this what you mean by "throughput on Wan Tx is over 6 mbps". I tried to reset the service, going online and about next 10 minutes is PLR is off again.
thanks for reply
Logged
ahenning
Team Wanos
Administrator
Full Member
Posts: 629
Re: Packet loss recovery config
«
Reply #2 on:
April 08, 2015, 11:46:44 AM »
Hi Lexyus,
It could be depending on the throughput.
Also take note of rules 96 and 97 that bypass traffic. If any devices on the .7 and .6 range is between the two wanop devices (e.g. firewall/routers), they need to be bypassed. These rules need to be very specific at the moment (Auto config planned).
Logged
CCIE RS, CCIE SP, Mnet&sys
Note:
Forum posts may be outdated. Please see the latest documentation at
wanos.co/docs
lexyus
Full Member
Posts: 34
Re: Packet loss recovery config
«
Reply #3 on:
April 09, 2015, 03:06:48 AM »
well.. between two wanop devices is just routers.
wanos (192.168.6.41) <---> routers <-----> WAN <-----> routers <---> wanos (192.168.7.41)
I tried to add bypass policy : (0.0.0.0/0 to 192.168.6.1/24 ) and (0.0.0.0/0 to 192.168.7.1/24) but peer status goes down. Must be some mistakes i made with the policy. hehe.. by the way, do my posts needs to be move to another specific thread? for more convenient others to read.
Logged
ahenning
Team Wanos
Administrator
Full Member
Posts: 629
Re: Packet loss recovery config
«
Reply #4 on:
April 09, 2015, 12:10:00 PM »
I'll move them to 'troubleshooting'
Please send me the registration tokens so we can load trial keys to see if the express limit is the cause
Logged
CCIE RS, CCIE SP, Mnet&sys
Note:
Forum posts may be outdated. Please see the latest documentation at
wanos.co/docs
ahenning
Team Wanos
Administrator
Full Member
Posts: 629
Re: Packet loss recovery config
«
Reply #5 on:
April 15, 2015, 12:37:26 PM »
Thanks, emailed the keys.
Logged
CCIE RS, CCIE SP, Mnet&sys
Note:
Forum posts may be outdated. Please see the latest documentation at
wanos.co/docs
lexyus
Full Member
Posts: 34
Re: Packet loss recovery config
«
Reply #6 on:
April 15, 2015, 12:46:26 PM »
Thanks you very much ahenning,
will update you tomorrow
Logged
lexyus
Full Member
Posts: 34
Re: Packet loss recovery config
«
Reply #7 on:
May 05, 2015, 01:51:00 AM »
Hi ahenning,
sorry for late reply. I have tried to attach the keys and both of wanos is now licensed plus. But the PLR still went off status. If I reset the services, PLR went ON, but suddenly went OFF again. Do i miss something?
Logged
Print
Pages: [
1
]
« previous
next »
Wan Optimization Support
»
Technical
»
Troubleshooting
»
Packet loss recovery config