Wan Optimization Support
Technical => Installation => : Wanos March 31, 2014, 02:02:07 AM
-
Broadcom BNX Network Interfaces not coming online on Dell 1950/ 2950 / HP ML350 G5 / HP ML360 G5 Similar.
An error during boot up is briefly displayed similar to "Can't load firmware file bnx2/bnx2-mps"
Current workaround:
Please uncomment the following line in /opt/bootsync.sh:
#rmmod bnx2 && modprobe bnx2
Reset just to be sure everything works after boot up:
/etc/wanos/clean.sh
After reboot verify:
'ifconfig' should display tun0
-
Affects HP Proliant DL360 G5 as well with error: bnx2: Can't load firmware file bnx2/bnx2-mps
Uncomment the following line with 'sudo vi /opt/bootsync.sh':
'#rmmod bnx2 && modprobe bnx2'
so that it reads
'rmmod bnx2 && modprobe bnx2'
To uncomment, navigate to the # sign and press 'x'
Press the Escape key then enter ':wq'
Then 'sudo reboot'