Wan Optimization Support
News:
Latest Release v.5.1.4
Home
Help
Search
Login
Register
Wan Optimization Support
»
Technical
»
Troubleshooting
»
Router Mode - Virtual lan0 not reachable
« previous
next »
Print
Pages: [
1
]
Author
Topic: Router Mode - Virtual lan0 not reachable (Read 5795 times)
tipsmark
Member
Posts: 4
Router Mode - Virtual lan0 not reachable
«
on:
May 28, 2015, 08:02:33 PM »
tried this, just cant get it working... when I configure for example wan0 with wanos-cfg and set the ip to 192.168.0.254 then edit /tce/etc/wanos/wanos.conf and set lan0 to 192.168.0.250/24 I am only able to ping 192.168.0.254.
Logged
ahenning
Team Wanos
Administrator
Full Member
Posts: 629
Re: Router Mode - Virtual lan0 not reachable
«
Reply #1 on:
May 28, 2015, 08:18:14 PM »
Ping the virtual lan0 from the network side.
The virtual lan0 is not pingable "locally" ... yet.
Logged
CCIE RS, CCIE SP, Mnet&sys
Note:
Forum posts may be outdated. Please see the latest documentation at
wanos.co/docs
tipsmark
Member
Posts: 4
Re: Router Mode - Virtual lan0 not reachable
«
Reply #2 on:
May 29, 2015, 01:49:58 AM »
not sure what you mean? wanos has a single nic and is on same subnet as the host that can ping the ip configured with wanos-cfg but unable to ping the ip address set via vi /tce/etc/wanos/wanos.conf.
how do I verify the wanos is in routing mode?
Logged
ahenning
Team Wanos
Administrator
Full Member
Posts: 629
Re: Router Mode - Virtual lan0 not reachable
«
Reply #3 on:
May 29, 2015, 07:12:29 AM »
Ping the virtual lan0 ip address from the network e.g. the server or router in the same address range. The virtual lan0 address is not reachable from the linux command line.
Logged
CCIE RS, CCIE SP, Mnet&sys
Note:
Forum posts may be outdated. Please see the latest documentation at
wanos.co/docs
tipsmark
Member
Posts: 4
Re: Router Mode - Virtual lan0 not reachable
«
Reply #4 on:
May 29, 2015, 08:41:51 AM »
thats what I did, not reachable from the network in the same range either. Tried this multiple times deploying new templates, tried in vmware, virtual box etc.
Logged
ahenning
Team Wanos
Administrator
Full Member
Posts: 629
Re: Router Mode - Virtual lan0 not reachable
«
Reply #5 on:
May 29, 2015, 08:56:53 AM »
Oh ok, enable promiscuous mode.
Logged
CCIE RS, CCIE SP, Mnet&sys
Note:
Forum posts may be outdated. Please see the latest documentation at
wanos.co/docs
tipsmark
Member
Posts: 4
Re: Router Mode - Virtual lan0 not reachable
«
Reply #6 on:
May 29, 2015, 02:51:43 PM »
ok that and forged transmit (spoofing) worked. enough to do it on port level too, no required for entire portgroup. thx now I can move on with testing.
http://i.imgur.com/piJ923L.png
where would I put my wanos applicances with this topology?
Logged
ahenning
Team Wanos
Administrator
Full Member
Posts: 629
Re: Router Mode - Virtual lan0 not reachable
«
Reply #7 on:
May 29, 2015, 03:16:16 PM »
To make testing easy:
Bridge mode at the remote site between ISP FW and L2 Switch.
Main site router mode in Vlan 5.
Test sever default route = wanos-lan0
ASA FW static host route 10.0.5.10/32 = wanos-wan0
Note: some route/ip stacks will just hand off from the FW directly to the server and ignore the /32 route when the destination address is in the same range as the interface.
«
Last Edit: May 29, 2015, 03:31:06 PM by ahenning
»
Logged
CCIE RS, CCIE SP, Mnet&sys
Note:
Forum posts may be outdated. Please see the latest documentation at
wanos.co/docs
Print
Pages: [
1
]
« previous
next »
Wan Optimization Support
»
Technical
»
Troubleshooting
»
Router Mode - Virtual lan0 not reachable