Messages

1

Troubleshooting / Re: Difference optimization grown

« on: March 25, 2015, 01:21:31 PM »

I check my MTU and he is at 1472 (1500-28) so the highest that I can have,
And how I can check my "packet loss rate on the Wan ?"

*edit*
Check your email I send you something for buy wanos licences

2

Troubleshooting / Difference optimization grown

« on: March 25, 2015, 08:14:55 AM »

Hi Antonie have a question about the diffence between your optimization on your video :
https://www.youtube.com/watch?v=sh-ta_twC18

When we send the first time the file we have the same speed but the second we grown up to 3.5MB/s
And you to 8.5MB/s Why so a big difference ?
(At the first transfer we just up to 0.8, 1MB/s max, and you 2MB/s)

Thanks for your answer

3

Troubleshooting / Re: Peer down

« on: March 20, 2015, 08:37:08 AM »

I send you a other email, I wait you 

4

Troubleshooting / Re: Peer down

« on: March 19, 2015, 04:30:02 PM »

Well, I add udp encapsulation, can you check if it's ok ? (on the screen)
And try to resend your mail don't know why I didn't receive it.

5

Troubleshooting / Re: Peer down

« on: March 19, 2015, 03:12:52 PM »

Don't receive your mail

6

Troubleshooting / Re: Peer down

« on: March 19, 2015, 02:01:28 PM »

Well, with the devices in the same network all is OK
Yet I try the network with my router, and the optimization is not work ><
Have change my interface stat, my network traffic Policies and my muti site
Really don't know why my peer don't go up 
It's a ZyXEL router (ZyWALL USG100)
I maybe forget something ...

7

Troubleshooting / Re: Peer down

« on: March 19, 2015, 09:20:31 AM »

I try without a router, in the same network:
PC1 - WANOS1 - WANOS2 - PC2
192.168.1.10 - 192.168.1.200 - 192.168.1.201 - 192.168.1.20
I create a "network shar" for share file and all work but not the multiple file optimization
The peer are down 

*edit*
peer are up I just change the interface stats on the interface web

8

Troubleshooting / Re: Peer down

« on: March 18, 2015, 03:18:45 PM »

Lan traffics is normal no ?
I'm sure that the cabling are ok because I do it with my tutor and a other computer scientist.
And I just use a router without vpn, so don't know why I must set the encap udp on both ends.
In the Optimization Settings I need to put the Optimization Level in Low or High ?

9

Troubleshooting / Re: Peer down

« on: March 18, 2015, 02:34:37 PM »

Screen of my Diagnostics Log

10

Troubleshooting / Re: Peer down

« on: March 18, 2015, 02:30:21 PM »

Well, when I put down Wanos2 or 1 the traffic stop, it's normal.
I encrease all the cpu devices to 4, and have yet more than 4mo/s, and all health status are ok
I try to check why my peer is down in the diagnostic log.
Send you a diagram of my network.(screen)*

11

Troubleshooting / Re: Peer down

« on: March 18, 2015, 01:39:35 PM »

Hi I use yet wanos 2.0.4
But peers is not up when traffic flows
And I use no cisco vpn between the sites.

I send you a screen of my connected peers and my multiSite
I try to share a file to PC1 to the PC2, it's work but multiple new transfert doesn't benefite the wanos optimization.

12

Troubleshooting / Re: Peer down

« on: March 18, 2015, 07:51:05 AM »

I send you my traffic Policie for PC1 and 2
The peer status are down.

13

Troubleshooting / Re: Peer down

« on: March 17, 2015, 04:55:09 PM »

Hi,

Your wanos configuration is working well, thanks.
I send a file between the two PC but multiple new transfert doesn't benefite the wanos optimization.
Normaly, if I send multiple time the same file, the transfert time should be instantly.

Are my diagnostics log normal ?

14

Troubleshooting / Re: Peer down

« on: March 17, 2015, 02:55:50 PM »

Hi,

I send you my network,

I want to know what I must config on Wanos 1 and Wanos 2 "or change" for my network.
It's a network of a firm who work with Artecal. So the network is working properly, I just want to put on it the 2 Wanos and after if it's work test it with Wanos Plus

I try to test it on Hyper-V with a router but don't really work can't ping Wanos to the router.

15

Troubleshooting / Peer down

« on: March 13, 2015, 03:43:59 PM »

Ok I see and I have a other question when you have the PC2 with a other network than the PC1,
can we go on the web interface with the same than address ? Or you just can connect on the interface with the address of Wanos2 ?