Technical > Hardware

Please e1000bp.ko new version

(1/2) > >>

makun:
Hello
I have Steelhead 550(No licenses).
This hardware cannot boot from Sata hdd.
I use Bootable USB of the Wanos.
(to 16GB Flashmemory)
but bypass NIC does not working.
Please e1000bp.ko for 3.8.13-Tiny.
Thanks.

ahenning:
Hi, is the e1000bp bypass driver from the wanos-2.0.5-silicom.zip image detecting the interfaces in the Riverbed Steelhead 550?

Original e1000bp thread: http://wanos.co/forum/index.php?topic=186.15

makun:
Hi Ahenning
I checked Original e1000bp thread.
but, I cannot try the wanos-2.0.5-silicom image,
because, Riverbed Steelhead 550 cannot boot from SATA HDD or SSD.(SATA HDD/SSD was detected)
I use Bootable USB image of the wanos write to USB flash 16GB.
and copy e1000bp.ko(direct link) , edit bootsync.sh.
but  "bypass nic" not working,


--- Quote ---tc@wanos:/$ sudo insmod /mnt/sda1/tce/packages/click/e1000bp.ko
insmod: can't insert '/mnt/sda1/tce/packages/click/e1000bp.ko': invalid module format

tc@wanos:/$ modinfo /mnt/sda1/tce/packages/click/e1000bp.ko
filename:       /mnt/sda1/tce/packages/click/e1000bp.ko
license:        GPL
author:         Silicom, Ltd
description:    Silicom PXBPI/PXTBI/PEBPI Network Driver
version:        8.0.35.silc.5.56.4-NAPI
...

--- End quote ---


Please assist, Thanks

ahenning:
Yes, as noted that driver is for the older kernel. The driver source is not compatible with the newer kernels.

I would recommend using a larger usb or external drive for now.

makun:
Oh...... Ok.......
I understood.
I will buy large USB flash, and try it.

Navigation

[0] Message Index

[#] Next page