Wan Optimization Support
Technical => Hardware => : makun August 02, 2015, 05:13:41 PM
-
Hello
I have Steelhead 550(No licenses).
This hardware cannot boot from Sata hdd.
I use Bootable USB of the Wanos.
(to 16GB Flashmemory)
but bypass NIC does not working.
Please e1000bp.ko for 3.8.13-Tiny.
Thanks.
-
Hi, is the e1000bp bypass driver from the wanos-2.0.5-silicom.zip (http://wanos.co/assets/wanos-2.0.5-silicom.zip) image detecting the interfaces in the Riverbed Steelhead 550?
Original e1000bp thread: http://wanos.co/forum/index.php?topic=186.15
-
Hi Ahenning
I checked Original e1000bp thread.
but, I cannot try the wanos-2.0.5-silicom image,
because, Riverbed Steelhead 550 cannot boot from SATA HDD or SSD.(SATA HDD/SSD was detected)
I use Bootable USB image of the wanos write to USB flash 16GB.
and copy e1000bp.ko(direct link) , edit bootsync.sh.
but "bypass nic" not working,
tc@wanos:/$ sudo insmod /mnt/sda1/tce/packages/click/e1000bp.ko
insmod: can't insert '/mnt/sda1/tce/packages/click/e1000bp.ko': invalid module format
tc@wanos:/$ modinfo /mnt/sda1/tce/packages/click/e1000bp.ko
filename: /mnt/sda1/tce/packages/click/e1000bp.ko
license: GPL
author: Silicom, Ltd
description: Silicom PXBPI/PXTBI/PEBPI Network Driver
version: 8.0.35.silc.5.56.4-NAPI
...
Please assist, Thanks
-
Yes, as noted that driver is for the older kernel. The driver source is not compatible with the newer kernels.
I would recommend using a larger usb or external drive for now.
-
Oh...... Ok.......
I understood.
I will buy large USB flash, and try it.
-
Ok then, once the system boots it is possible to mount the datastore on the internal drives.